GA-A55M-DS2 NETWORK DRIVER

Home  /   GA-A55M-DS2 NETWORK DRIVER

A memory module can be installed in only one direc- tion. Installing the APU A. Note Make sure the drivers for the Chipset, onboard graphics, and external graphics card are properly installed. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The C6 state is a more enhanced power-saving state than C1.

Uploader: Vozshura
Date Added: 5 January 2016
File Size: 14.9 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92997
Price: Free* [*Free Regsitration Required]

When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective. If you do not input any LD name, the default LD name will ga-a55m-dz2 used.

For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis. You can click the Install All button and “Xpress Install” will install all the rec- ommended drivers. Use this audio jack for line in devices such as an optical drive, walkman, etc.

When connecting a fan cable, be sure to connect it in the correct orientation the black connector wire is the ground wire. The BIOS defaults settings help the system to operate in optimum state. Then connect the power connector from your power supply to the hard drive.

  FUJI XEROX DOCUMENT CENTER C360 DRIVER

Note 1 All integrated graphics ports do not support Hot plug. To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption be used W or greater. If the power button is pressed for less than ga-a555m-ds2 seconds, the system will enter suspend mode. Remove the monitor cable from the graphics card and plug it into the integrated graphics port on the back panel and restart your computer. You may clear the CMOS values by removing the battery: Auto Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives.

Default Disabled Disables this function.

Untitled | Pearltrees

The LED is on when the hard drive is ga-5a5m-ds2 or writing data. If the driver Autorun screen does not appear automatically, go to My Computer, double-click the optical drive and execute the Run.

Row Precharge Ga-a55m-fs2 Options are: When this item is set to Enabled, the following four functions will become unavailable: Auto defaultManual. Optimized Defaults UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con- troller.

Under the Directive, used equipment must be marked, collected separately, and disposed of properly.

Row Cycle Time Options are: Most fan headers possess a foolproof insertion design. To clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch ga-a55m–ds2 two pins for a few seconds. Inadequate BIOS flashing may result in system malfunction.

  HP DVD565S-H08 DRIVER

Gigabyte GA-A55M-DS2(rev. 1.1) Realtek LAN Driver

Skip to main content. Auto lets the BIOS automatically set the system voltages as required.

The adjustable range is from MHz to MHz. The 12V power con- nector mainly supplies power to the APU.

If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system. Disabled If enabled, set the date and time as following: These stickers are required for warranty validation. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. User Password When the Password Check item is set to System, you must enter the supervisor password or user password at system startup to continue system boot.